Swapping gas for induction needs a dedicated high-current circuit back to the switchboard, benchtop modification for the new cutout, and the gas point capped off by a licensed plumber.
5.0 from 57 Google reviews · A-Grade licensed · REC 33326
We assess the cooktop requirements, switchboard capacity, circuit route, bench cutout and cabinetry clearances before setting the scope. The quote covers the dedicated circuit, connection, testing, certification and coordination required for the changeover. For board requirements, appliance selection, installation and gas-to-induction planning, see the full detail on induction cooktop installation.
Belgrave Heights is a small, almost entirely residential area: 98.7% of occupied dwellings were separate houses at the 2021 Census, and 10.0% were rented. For an induction swap that means a house kitchen in most cases, with the work being a new circuit from the switchboard, an RCD, and a cooktop cut-out checked for depth and airflow underneath.
The gas network reaches streets in Belgrave Heights, so the existing hob may well be gas, and a licensed gasfitter caps it off; if it is the last gas appliance in the house, the gas connection can be closed through the retailer and the daily supply charge ends. Home sites here date back to the Lockwood Estate subdivision of 1914, and older houses may need the switchboard upgraded before a cooktop circuit is added. A home with rooftop panels can do much of its cooking while the sun is up. AusNet Services is the distributor if the extra load calls for a supply upgrade.
A-Grade licensed, REC 33326, fully insured, CEC accredited.
Absolutely fantastic service and work done! The boys were super accommodating, answered any questions I had without a problem, left everything neat and tidy and overall did an amazing job installing our battery and inverter. Cannot recommend enough.
Isaac Giblett · Battery + inverter
Everything immediately around Belgrave Heights, including Belgrave, Belgrave South, Lysterfield and Selby. We treat the group as one working area rather than separate bookings.
Belgrave Heights falls under Yarra Ranges, postcode 3160. No permit is needed for standard work of this kind.
Rarely. Most cooktops need their own dedicated circuit rated for their full draw. Sharing an oven circuit is a common shortcut that causes nuisance tripping and isn't compliant.
Tell us which cooktop you are considering and what is installed now. We’ll assess the board, circuit route and cabinetry requirements, then provide a clear electrical quote. Book an assessment or call our Boronia crew to discuss the changeover.
5.0 from 57 Google reviews
