Boronia based · Melbourne's eastBoronia based · Serving Melbourne's east + south east
Industrial electrical work covers three-phase power, machine wiring, motor controls, distribution boards and breakdown response for factories and workshops. We work to isolation procedures and get plant back running with the fault properly documented. In Blackburn that work is done by our own crew out of Boronia, certified and quoted before we start.
5.0 from 57 Google reviews · A-Grade licensed · REC 33326
Blackburn is part of our home patch — we're through Whitehorse most weeks, so industrial electrical work here doesn't come with a travel premium or a long wait. Breakdown response is judged on how fast the line runs again. Getting there quickly matters, but so does fixing the cause rather than resetting an overload and leaving.
Because we're already working across Mitcham, Nunawading and Doncaster, a Blackburn job usually slots into a run we're doing anyway. That keeps the call-out honest and means we can come back if something needs a second look.
Lock-out, tag-out and site procedures followed before any work starts.
Power and control circuits traced against the schematic, not swapped blind.
Machine wiring, motor controls, distribution and cable management.
Findings, changes and test results written up for the plant record.
Every industrial electrical work booking in Blackburn runs off the same checklist, whether it's a 1960s brick veneer or a new build. Here's exactly what's covered in the price we quote you.
A-Grade licensed, REC 33326, fully insured and CEC accredited for solar design and installation. Licensed and insured, working to site isolation and safety procedures with documented testing.
The part people underestimate with industrial electrical work is the prep. Lock-out, tag-out and site procedures followed before any work starts. We do that before anyone quotes a number, because a price written without looking at the board is a price that changes halfway through the job.
Motor and control faults hide in the control circuit as often as the power side. Reading the schematic before touching anything saves hours of guessing on unfamiliar plant.
“Quoted before we start, certified when we finish.”
Whitehorse is full of mid-century brick homes renovated in stages, which shows up as a patchwork of wiring vintages behind one tired switchboard. Rubber-insulated and early PVC cabling still turns up in ceiling spaces around lighting circuits, and plenty of circuits predate RCD rules entirely. We'd rather bring the board and the older circuits up to standard than hang new load off them.
Blackburn sits on the same run as Mitcham, Nunawading, Doncaster — if we're at one, we're usually minutes from the others.
Anyone can say they're licensed. Here's what that actually means when we're on your job — and the paperwork you'll hold at the end of it.
You see the number, the inclusions and the exclusions in writing. If the scope changes on site, we stop and ask — we don't invoice a surprise.
No labour hire, no subcontractors. The electrician who quotes your job is the one standing in your switchboard, on the same REC (33326).
Every job finishes with a Certificate of Electrical Safety, tested circuits, a labelled board and photos of anything hidden behind a wall.
Workmanship guaranteed and manufacturer warranties registered in your name. If something plays up, you ring us — not a call centre in another state.
Nobody can quote industrial electrical work honestly without seeing the job. What we can do is show you exactly what moves the number, so the price you're given in Blackburn makes sense before you agree to it. Breakdowns are prioritised. Installation work is programmed around production windows.
Plenty of Blackburn homes still run a board that predates RCDs. If yours does, it either needs upgrading first or it needs allowing for in the quote — we tell you which on the day, not after.
Roof pitch, subfloor clearance and how far the run is from the board move the labour more than the fittings do. We measure it before pricing, so the number holds.
Breakdown work is charged hourly with the rate confirmed up front; project work is quoted per scope.
Licensed and insured, working to site isolation and safety procedures with documented testing. Where a rebate applies we handle the forms and the compliance evidence — you don't chase it.
These are Google reviews from real jobs across Melbourne's east — the same crew that would turn up in Blackburn.
Excellent service! The team arrived on time and completed the installation efficiently and up to scratch. Everything was done neatly, with great attention to detail. Ryan and Jack are top blokes and easy to deal with. Highly recommended!
Jeffrey Belvez · Glen Waverley
Absolutely fantastic service and work done! The boys were super accommodating, answered any questions I had without a problem, left everything neat and tidy and overall did an amazing job installing our battery and inverter. Cannot recommend enough.
Isaac Giblett · Battery + inverter
Zak and Ryan did a amazing job. Even with the obstacles of a double story home with a internal switch board they persevered in the heat and got the job done. Thanks guys we realy appreciate your work and polite attitude.
Stephen S · Switchboard
Luke and his team installed our solar panels over the space of 2 days. Great service arrived on time and communicated well, took away all rubbish made sure the place was left tidy and walked me through the app and next steps. Would highly reccomend!
Christie V · Solar install
Ryan and Jack did a great job doing the electrical work on my new 4 head split system. They got the job done in no time, and my split systems were up and running. Once connected, Ryan made sure all 4 heads were working. Thanks guys, great job!
James "Mitchi" Mitch · Split system
The experience is very nice with them. Specially Roy and Jack did their best. We are so much happy about their service. They heard every single word of us and suggest us which is good and why. Highly recommend
Anisa Tasnim · Hot water swap
If there's more than one thing on the list, tell us when you book. Doing it in the one Blackburn visit means one set-up, one clean-up and one certificate — and it's almost always cheaper than having us back a second time.
Breakdown work is charged hourly with the rate confirmed up front; project work is quoted per scope. There's no travel premium to Blackburn — it's on our regular run from the Boronia workshop.
Breakdowns are prioritised. Installation work is programmed around production windows.
Yes — we're A-Grade licensed electricians and a Registered Electrical Contractor (REC 33326), fully insured and CEC-accredited for solar design and installation. Licensed and insured, working to site isolation and safety procedures with documented testing.
Yes. We prioritise plant that's stopped, follow site isolation procedures, and write up what caused it so the same fault doesn't come back next month.
We work right across Whitehorse — including Mitcham, Nunawading and Doncaster — plus the wider east and south-east, from Boronia to Berwick and Balwyn to Warrandyte.
Luke · Founder, A-Grade electrician
Most of what's wrong with this industry comes down to one thing: the person selling isn't the person installing.
I'm a licensed A-Grade electrician, and so is everyone who'll be on your roof or in your switchboard. When we quote your home, we're quoting work we'll do ourselves — which is why we'll happily talk you out of gear you don't need.
If you're thinking about getting off gas, call us. Worst case, you'll hang up knowing more than you did.
Founder, Polarised Electrical
Book a free home assessment, or call and talk to a real sparky today.
5.0 from 57 Google reviews
