Boronia based · Melbourne's eastBoronia based · Serving Melbourne's east + south east
Lighting work covers LED downlight upgrades, layout design, dimming, outdoor and security lighting, and replacing old halogen fittings that run hot. We plan the layout for the room rather than spacing fittings evenly and hoping. In Belgrave Heights that work is done by our own crew out of Boronia, certified and quoted before we start.
5.0 from 57 Google reviews · A-Grade licensed · REC 33326
Belgrave Heights is part of our home patch — we're through the Dandenong Ranges most weeks, so lighting and downlight installation here doesn't come with a travel premium or a long wait. Old halogen downlights are both a running cost and a fire risk — they run hot against insulation and draw many times what an LED does for less light. Swapping them is usually the fastest efficiency win in an older home.
Because we're already working across Belgrave South, Belgrave and Tecoma, a Belgrave Heights job usually slots into a run we're doing anyway. That keeps the call-out honest and means we can come back if something needs a second look.
Room by room, working to surfaces and walls rather than a grid.
Matched drivers and dimmers, colour temperature chosen per room.
Clean cutouts, insulation-safe fittings, minimal patching.
Tested, aligned, and the mess cleaned up before we go.
Every lighting and downlight installation booking in Belgrave Heights runs off the same checklist, whether it's a 1960s brick veneer or a new build. Here's exactly what's covered in the price we quote you.
A-Grade licensed, REC 33326, fully insured and CEC accredited for solar design and installation. Insulation-contact rated fittings used where required, and work certified where applicable.
The part people underestimate with lighting and downlight installation is the prep. Room by room, working to surfaces and walls rather than a grid. We do that before anyone quotes a number, because a price written without looking at the board is a price that changes halfway through the job.
Layout beats fitting choice every time. Downlights placed in a grid light the floor; placed against the work surfaces and walls they light the room. Getting the plan right costs nothing extra at install time.
“Quoted before we start, certified when we finish.”
Heavy tree cover is the whole story for solar in the Ranges. Shading moves across the roof through the day and hard through winter, so panel-level optimisers or micro-inverters usually earn their keep instead of a plain string, and we model yield honestly before quoting. Where the roof simply won't do it, a smaller array paired with a battery on a good tariff often beats chasing kilowatts.
Belgrave Heights sits on the same run as Belgrave South, Belgrave, Tecoma — if we're at one, we're usually minutes from the others.
More about lighting + downlightsAnyone can say they're licensed. Here's what that actually means when we're on your job — and the paperwork you'll hold at the end of it.
You see the number, the inclusions and the exclusions in writing. If the scope changes on site, we stop and ask — we don't invoice a surprise.
No labour hire, no subcontractors. The electrician who quotes your job is the one standing in your switchboard, on the same REC (33326).
Every job finishes with a Certificate of Electrical Safety, tested circuits, a labelled board and photos of anything hidden behind a wall.
Workmanship guaranteed and manufacturer warranties registered in your name. If something plays up, you ring us — not a call centre in another state.
Nobody can quote lighting and downlight installation honestly without seeing the job. What we can do is show you exactly what moves the number, so the price you're given in Belgrave Heights makes sense before you agree to it. A full-house downlight replacement is normally a day. Single rooms are a couple of hours.
Plenty of Belgrave Heights homes still run a board that predates RCDs. If yours does, it either needs upgrading first or it needs allowing for in the quote — we tell you which on the day, not after.
Roof pitch, subfloor clearance and how far the run is from the board move the labour more than the fittings do. We measure it before pricing, so the number holds.
Usually priced per fitting with the plan agreed up front, so a whole-house swap comes back as one number rather than a surprise at the end.
Insulation-contact rated fittings used where required, and work certified where applicable. Where a rebate applies we handle the forms and the compliance evidence — you don't chase it.
These are Google reviews from real jobs across Melbourne's east — the same crew that would turn up in Belgrave Heights.
Excellent service! The team arrived on time and completed the installation efficiently and up to scratch. Everything was done neatly, with great attention to detail. Ryan and Jack are top blokes and easy to deal with. Highly recommended!
Jeffrey Belvez · Glen Waverley
Absolutely fantastic service and work done! The boys were super accommodating, answered any questions I had without a problem, left everything neat and tidy and overall did an amazing job installing our battery and inverter. Cannot recommend enough.
Isaac Giblett · Battery + inverter
Zak and Ryan did a amazing job. Even with the obstacles of a double story home with a internal switch board they persevered in the heat and got the job done. Thanks guys we realy appreciate your work and polite attitude.
Stephen S · Switchboard
Luke and his team installed our solar panels over the space of 2 days. Great service arrived on time and communicated well, took away all rubbish made sure the place was left tidy and walked me through the app and next steps. Would highly reccomend!
Christie V · Solar install
Ryan and Jack did a great job doing the electrical work on my new 4 head split system. They got the job done in no time, and my split systems were up and running. Once connected, Ryan made sure all 4 heads were working. Thanks guys, great job!
James "Mitchi" Mitch · Split system
The experience is very nice with them. Specially Roy and Jack did their best. We are so much happy about their service. They heard every single word of us and suggest us which is good and why. Highly recommend
Anisa Tasnim · Hot water swap
If there's more than one thing on the list, tell us when you book. Doing it in the one Belgrave Heights visit means one set-up, one clean-up and one certificate — and it's almost always cheaper than having us back a second time.
Usually priced per fitting with the plan agreed up front, so a whole-house swap comes back as one number rather than a surprise at the end. There's no travel premium to Belgrave Heights — it's on our regular run from the Boronia workshop.
A full-house downlight replacement is normally a day. Single rooms are a couple of hours.
Yes — we're A-Grade licensed electricians and a Registered Electrical Contractor (REC 33326), fully insured and CEC-accredited for solar design and installation. Insulation-contact rated fittings used where required, and work certified where applicable.
Most of the time, yes — modern LED fittings are made to suit common existing cutouts. Where the hole is an odd size we can use a compatible fitting or patch neatly.
We work right across the Dandenong Ranges — including Belgrave South, Belgrave and Tecoma — plus the wider east and south-east, from Boronia to Berwick and Balwyn to Warrandyte.
Luke · Founder, A-Grade electrician
Most of what's wrong with this industry comes down to one thing: the person selling isn't the person installing.
I'm a licensed A-Grade electrician, and so is everyone who'll be on your roof or in your switchboard. When we quote your home, we're quoting work we'll do ourselves — which is why we'll happily talk you out of gear you don't need.
If you're thinking about getting off gas, call us. Worst case, you'll hang up knowing more than you did.
Founder, Polarised Electrical
Book a free home assessment, or call and talk to a real sparky today.
5.0 from 57 Google reviews
